ACPL-522 Screw Air Compressors Fluid
Short Description:
Using fully synthetic PAG, POE and high-performance additives, it has excellent oxidation stability and high temperature stability, and there is very little carbon deposit and sludge formation. It provides good protection and excellent lubricity for the compressor, standard working conditions The working time is 8000-12000 hours, suitable for Sullair air compressors and other brands of high-temperature air compressors.
Compressor Lubricant
PAG(Polyether base oil)+POE(Polyol)+High performance compound additive
Product Introduction
Using fully synthetic PAG, POE and high-performance additives, it has excellent oxidation stability and high temperature stability, and there is very little carbon deposit and sludge formation. It provides good protection and excellent lubricity for the compressor, standard working conditions The working time is 8000-12000 hours, suitable for Sullair air compressors and other brands of high-temperature air compressors.
ACPL-522 Product Performance And Feature
● Good oxidation stability and high temperature stability which can extends life of compressor
● Extremely low volatility reduces maintenance and saves consuming costs
● Corrosion protection increases system reliability and reduces downtime
● Outstanding lubricity improves efficiency and reduces operating costs
● Standard working condition: 8000-12000H
● Applicable temperature: 85℃-110℃
● Oil change cycle: 8000H, ≤95℃
Purpose
ACPL 522 is PAG and POE based full synthetic lubricant. It is economically valued for high end compressors,which make change time as long as 8000H under 95 degree. It is suitable for most of the global brands. Especially it is the perfect replacement for Sullair original lubricant. SULLUBE-32 250022-669
| PROJECT NAME | UNIT | SPECIFICATIONS | MEASURED DATA | TEST METHOD |
| APPEARANCE | - | green | pale yellow | Visual |
| VISCOSITY | 32 | |||
| DENSITY | 25oC,kg/l | 0.982 | ||
| KINEMATIC VISCOSITY @40℃ | mm7s | 45〜55 | 35.9 | ASTM D445 |
| KINEMATIC VISCOSITY @100℃ | mm2/s | measured data | 7.9 | ASTM D445 |
| VISCOSITY INDEX | / | > 130 | 177 | ASTM D2270 |
| FLASH POINT | ℃ | > 220 | 266 | ASTM D92 |
| POUR POINT | ℃ | < -33 | -51 | ASTM D97 |
| TOTAL ACID NUMBER | mgKOH/g | 0.06 | ||
| CORROSION TEST | pass | pass |
The performance of the lubricant will change due to the power loacfeng, unloading pressure, operating temperature, also the original lubricant composition and the residue of the compressor
