Factory Cheap Hot Workshop Fume Extractor - ACPL-VCP DC Diffusion pump silicone oil – Jiongcheng
Short Description:
Factory Cheap Hot Workshop Fume Extractor - ACPL-VCP DC Diffusion pump silicone oil – Jiongcheng Detail:
Product Introduction
ACPL-VCP DC is a single-component silicone oil specially designed for use in ultra-high vacuum diffusion pumps. It has high thermal oxidation stability, small viscosity-temperature coefficient, narrow boiling point range, and steep vapor pressure curve (a little temperature change, a large vapor pressure change), low steam pressure at room temperature, low freezing point, coupled with chemical inertness, non-toxic, odorless, and non-corrosive. Therefore, it can be used for a long time under 25CTC, in a vacuum environment, allowing higher temperature use.
ACPL-VCP DC product performance and advantages
● Reduce the running time.
● Single-component silicone oil takes much shorter time to reach the maximum vacuum degree than with multi-component silicone oil, and it is quickly evacuated.
● Minimal reflux, the vapor pressure of the diffusion pump silicone oil is extremely low, so that it is not necessary for many applications or existing traps to refrigerate.
● Longer service life.
● The thermal and chemical stability of silicone oil allows long-term operation without deterioration and pollution.
● The cleaning system needs less maintenance.
● Fast cycle, reducing downtime, and less need to change oil.
Purpose
ACPL-VCP DC diffusion pump silicone oil can be used as ultra-high vacuum diffusion pump oil in electronics, metallurgy, instrumentation and other industries.
It can be used as high temperature heat carrier and transfer fluid in the instrument.
It can be used as the working fluid of the ultra-high diffusion pump required by the electronics, aerospace, nuclear industry and other industries.
|
Project name |
ACPL-VCP DC704 |
ACPL-VCP DC705 |
Test metod |
|
Kinematic viscosity (40℃), mm2/s |
38-42 |
165-185 |
GB/T265 |
|
Refractive index 25℃ |
1.550-1.560 |
1.5765-1.5787 |
GB/T614 |
|
Specific gravity d25 25 |
1.060-1.070 |
1.090-1.100 |
GB/T1884 |
|
Flash point (opening), ℃≥ |
210 |
243 |
GB/T3536 |
|
Density(25℃) g/cm3 |
1.060-1.070 |
1.060-1.070 |
|
|
Saturated vapor pressure, Kpa < |
5.0×10-9 |
5.0×10-9 |
SH/T0293 |
|
Ultimate vacuum degree, (Kpa), 4 |
1.0×10-8 |
1.0×10-8 |
SH/T0294 |
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Factory Cheap Hot Workshop Fume Extractor - ACPL-VCP DC Diffusion pump silicone oil – Jiongcheng, The product will supply to all over the world, such as: Norway, Algeria, Uruguay, We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
By Ida from Botswana - 2018.05.22 12:13
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Henry stokeld from kazakhstan - 2017.11.01 17:04
