MXO series Vacuum Pump Oil

MXO series vacuum pump oil is an ideal lubricating material and is widely used in my country’s military industry,display industry,

lighting industry,solar industry,coating industry,refrigeration industry,etc.It can be used in various domestic and imported

single-stage and two-stage vacuum pumps,such as British Edwards,German Leybold,French Alcatel,Japanese Ulvoil,etc.

Product Detail

● Excellent thermal stability,which can effectively reduce the formation of sludge and other sediments causedby temperature changes;

● Excellent high oxidation stability,greatly extending the service life of oil products.

● Excellent anti-wear lubrication performance,greatly reducing interface wear during pump compression.

● Good foam characteristics reduce vacuum pump wear caused by overflow and flow interruption.

● Good emulsification resistance and strong oil-water separation,reducing the risk of oil emulsification.

● Narrow differential base oil,the saturated vapor pressure of the product is small.

Avoid prolonged or repeated skin contact.If ingestion requires medical attention,protect the environment and dispose of product,

waste oil and containers in accordance with legal regulations.

PROJECT	MXO68	MXO100	MXO150	TEST METHOD
kinematic viscosity,mm²/s	65-75			GB/T265
40℃	12	95-105	140-160
100℃		13	13
Viscosity index	110	110	110	GB/T2541
flash point,(opening)℃	250	250	250	GB/T3536
pour point	-20	-20	-20	GB/T3536
air release value	5	5	5	SH/TO308
Moisture	30	30	30
ultimate pressure(Kpa),100℃	2.0×10-5 2.0×10-*	2.0×10-⁵ 2.0×10-4	2.0×10-5 2.0×10-4	GB/T6306.2
partial pressure
Full pressure
(40-40-0),82℃,min,	15	15	15	GB/T7305
Anti-emulsification	15	15	15	GB/T7305
Foamability (foam tendency/foam stability) 24℃ 93.5℃ 24℃(after)	20/0 0/0 10/0	20/0 0/0 10/0	20/0 0/0 10/0	GB/T12579